Click the instructions listed down below
■ change the Language
■ How to find a SSID and Password
■ WX05 Profile Setting
■ restore data usage settings
Change the language
1.Press “設定”.
2.Press”メンテナンス”
3.Press “言語設定（Language）”
4.Select “English”
How to find a SSID and Password
1.Press “Information”.
2.Select “Wi-Fi Information”
3.Once you have found the SSID on your pocket Wi-fi, look for the SSID on your phone/PC on the Wi-fi section.
If you found the SSID on your phone/PC enter the password to connect to the Wi-fi. The password is shown under the SSID.
How to profile setting
The following settings have been registered at the time of shipment.
If you had RESET the device,you have to need to set the following connection setup operations
*connect to WX05 on your PC or Mobile Phone and Start the web browser ,
Enter “192.168.179.1” in the address entry field.
(even if no signal, only can connect to “192.168.179.1”)
*You can change languages in English.
Click “Top Page”
Click “Advanced Setting Top”
Enter “admin” to “ユーザー名” and
“WX06 Administrator initial password to パスワード Then Click “ログイン”
①Click “Network Setting” ②Click “Profile Setting” ③Pull down “no setup”
*Please enter the information below
| ①Profile Name | SB |
| ②APN Name | plus.4g |
| ③User Name | plus |
| ④Password | 4g |
Choose pulldown▼
⑤Authentication type : CHAP
⑥IP Type : IPv4
⑦Apply
Click “Save”
①Click ”Basic Setting” ②pull down “High Speed Plus Area Mode” ③Click ”Apply”
Please check if the “Antenna” and “Wi-Fi” icons on the upper right turn light blue, it’s done.
WX05 How to restore data usage settings
Tap “Information”
Tap “DATA Usage”
① Tap “Down button ↓” then ②Click “Clear”
Thank you!