How to profile setting
The following settings have been registered at the time of shipment.
If you had RESET the device, you have to need to setting following connection setup operations
Connect to WX06 on your PC or Mobile Phone and Start the web browser ,
Enter “http://speedwifi-next.home” in the address entry field.(even if no signal, only can connect to “http://speedwifi-next.home”)
Enter User Name “admin” and Password “*W06 device IMEI last 5 digits”
*The password is the initial value of the last 5 digits of the IMEI written at the bottom of the back of the W06 main unit.
*connect to W06 on your PC or Mobile Phone. You can change languages in English.
*NOTE : Click “Login” at the top right of the displayed setting tool screen
If you see a message box asking you to change your password, click Later.(you don’t actually need to make any changes)
If you could login The setting screen of the Speed Wi-Fi NEXT setting tool is displayed.
②Click “profile setting” at the left menu of the displayed setting tool screen
③The default profile [Internet] is displayed.click “New” at the bottom
*Please enter the information below
⑤Authorization Method : CHAP
⑥IP Type : IPv4
Note: Pressing the “Save” button will save the settings and enable the global IP option.
Please note that a monthly fee of 105 yen (including tax) will be charged when the Global IP Option is enabled.
last Step : You have to apply High Speed Plus Area so tap pulldown “communication Mode Setting : High Speed Plus Area” and “Disabled” → Click Apply
Confirm : Click “OK”
Waitting for start reboot end, If the setting tool screen and the W07 device screen are displayed as shown below, the process is complete.