Click the instructions listed down below

■ change the Language

■ How to find a SSID and Password

■ WX06 Profile Setting

■ restore data usage settings


Change the language

1.Press “設定”.


3.Press “言語設定(Language)”

4.Select “English”

How to find a SSID and Password

1.Press “Information”.

2.Select “Wi-Fi Information”

3.Once you have found the SSID on your pocket Wi-fi, look for the SSID on your phone/PC on the Wi-fi section. If you found the SSID on your phone/PC enter the password to connect to the Wi-fi. The password
is shown under the SSID.


How to profile setting

The following settings have been registered at the time of shipment.
If you had RESET the device,you have to need to setting following connection setup operations

*connect to WX06 on your PC or Mobile Phone and Start the web browser ,
Enter “” in the address entry field.
(even if no signal, only can connect to “”)

*You can change languages in English.

profile setting
Click “Top Page”
profile setting
Click ”advanced setting top”
profile setting
Tap “Information”
profile setting
Tap “Device Information”
profile setting
Tap down button and You can see “Administrator initial password”
profile setting
Click “Advanced Setting Top”
profile setting
Enter “admin” to “ユーザー名” and
“WX06 Administrator initial password to パスワード Then Click “ログイン”
profile setting
①Click “Network Setting” ②Click “Profile Setting” ③Pull down “no setup”
profile setting
*Please enter the information below

①Profile NameSB
②APN Nameplus.4g
③User Nameplus

Choose pulldown▼
⑤Authentication type : CHAP
⑥IP Type : IPv4

profile setting
Click “Save”
profile setting
①Click ”Basic Setting” ②pull down “High Speed Plus Area Mode” ③Click ”Apply”

profile setting
Please check if the “Antenna” and “Wi-Fi” icons on the upper right turn light blue, it’s done.


WX06 How to restore data usage settings

Click “Information”

Click “DATA Usage”

① Click “Down button ↓” then ②Click “Clear”


Thank you!